|
|
|
12136 - 12150 of 19439 items
|
|
 |
KLV216 - Kim Lighting Micro-flood Accent Light
Kim Lighting
KLV216 - Kim Lighting Micro-flood Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: Micro-floodFamily: 12 Volt LuminairesLamping: T-3 or T-4 Bipin HalogenWattage: 20W - 50WProduct Details:Housing and Lens Frame: Die-cast, low copper aluminum. Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance.Reflector: (KLV215) Hydroformed aluminum.Lens: Clear flat tempered glass with silicone gasket.Fasteners: Stainless steel.Socket: G4 to GY6.35 socket for bipin lamp.Wiring: 6' No. 18-2 12 Volt cable with fork connectors.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Available in standard pack quantities only. Standard pack discount below does not apply.Note: Remote transformer required.Optional Accessories (Sold Separately):EP17 - PowerPost MountKLV400 - Spear Mount (Must be installed in concrete)KLV405 - Surface Mount KLV415 - Extension ModuleBD215BL -Optional Barn DoorsBD215DB - Extruded aluminum, fullyBD215GR - adjustable. Provides beam and glare control.FH215BL - Optional Fixed HoodFH215DB - Formed .062" thick aluminum.Click here to view Options and Accessories application guidelines.
More Information... |
|
 |
KLV410 - Kim Lighting Sealed Connector
Kim Lighting
KLV410 - Kim Lighting Sealed ConnectorAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Sealed Connector ()Series: Sealed ConnectorFamily: 12 Volt AccessoriesProduct Details:Connectors may be buried, installed at grade, or surface mounted. They are designed to eliminate the common problem of corrosion and oxidation of the connections, which can cause power interruption. Injection molded in black Valox, the two-piece connectors have stainless steel screws. The standard sealed connector, KLV410, is for connecting one fixture to the cable.The standard connector employs piercing screws, and the branch connector utilizes compression type connectors and brass bussbars.All connections are totally sealed and waterproofed with the dielectric mastic provided. Maximum design flexibility is assured since fixtures can be easily added or relocated by installing a new sealed connector.Sealed ConnectorConnectors are shipped in standard pack quantities only for landscape Lighting distribution stock. Click here to view Options and Accessories application guidelines.
More Information... |
|
 |
KLV530 - Kim Lighting 500W In-grade Transformer - 120V Input
Kim Lighting
KLV530 - Kim Lighting 500W In-grade Transformer - 120V InputAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: In-grade Transformer ()Finish: Black, Dark Bronze, Verde GreenSeries: In-grade TransformersFamily: 12 Volt AccessoriesProduct Details:Enclosure: Cast aluminum housing and cover, full silicone gasket, cover fastens with ten stainless steel allen head screws. Internal heat barrier between transformer and components. Anti-siphon chamber for 12 volt connection.Transformer: Core and coil, wired to terminal block.Terminal Block: Black phenolic with brass connectors.Circuit Breaker: Mounted on secondary side of transformer to prevent overloading. (KLV525) 1-30A, (KLV530) 2-30A, mounted to terminal block plate.Conduit Taps: Two 3/4" NPT in bottom. Splice compartment volume\x9629 cubic inches, approved for through wiring.Finish: Super TGIC thermoset polyester powder coat paint applied over a titanated zirconium conversion coating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Amps: 250W\x962.5, 500W\x965.2.Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.500 watt In-grade TransformerNOTE: The total wattage of all fixtures connected to one transformer must not exceed the total wattage capacity of that transformer.Click here to view Options and Accessories application guidelines.
More Information... |
|
 |
KLV531DB - Kim Lighting 500W In-grade Transformer - 277V Input
Kim Lighting
KLV531DB - Kim Lighting 500W In-grade Transformer - 277V InputAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: In-grade Transformer ()Finish: Dark BronzeSeries: In-grade TransformersFamily: 12 Volt AccessoriesProduct Details:Enclosure: Cast aluminum housing and cover, full silicone gasket, cover fastens with ten stainless steel allen head screws. Internal heat barrier between transformer and components. Anti-siphon chamber for 12 volt connection.Transformer: Core and coil, wired to terminal block.Terminal Block: Black phenolic with brass connectors.Circuit Breaker: Mounted on secondary side of transformer to prevent overloading. (KLV525) 1-30A, (KLV530) 2-30A, mounted to terminal block plate.Conduit Taps: Two 3/4" NPT in bottom. Splice compartment volume\x9629 cubic inches, approved for through wiring.Finish: Super TGIC thermoset polyester powder coat paint applied over a titanated zirconium conversion coating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Amps: 250W\x962.5, 500W\x965.2.Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.500 watt In-grade TransformerNOTE: The total wattage of all fixtures connected to one transformer must not exceed the total wattage capacity of that transformer.Click here to view Options and Accessories application guidelines.
More Information... |
|
 |
KLV600 - Kim Lighting 200W Above Grade Transformer Single Circuit
Kim Lighting
KLV600 - Kim Lighting 200W Above Grade Transformer Single CircuitAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: 200w Above Grade Transformer Single Circuit ()Family: 12 Volt AccessoriesProduct Details:Enclosure: Formed 16 ga. stainless steel enclosure with integral hinge. Cover is secured with two stainless steel screws. A through hole is provided in the bottom edge for a padlock (by others). 1/2" knockouts on each side of the enclosure are provided for hardwiring or accessory photocell mounting.Transformer: Core and coil type fully epoxy encapsulated. Output is multi-tap 12V / 13V / 14V / 15V. The 200 and 300-watt units have single circuit output, the 600-watt unit has two circuits for output. Variable taps provide flexibility in system design with the 12 volt tap for fixtures near the transformer location and higher voltages for more remote fixtures.Terminal Block: 80-amp euro-style terminal block.Circuit Breaker: 25 amp magnetic circuit breaker (1) per circuit.Cord: Six foot, heavy duty outdoor power cord is provided and installed.Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.120V Input#18-2 SJTW cordNOTE: Output wattage is not to exceed 25 amps on each circuit. Weather conditions must be considered when determining load on transformers, hot weather areas should reduce the output wattage to prevent heat build-up on circuit breakers. The voltage at each fixture must not exceed 12 volt. Load and distance must be considered when determining which voltage tap to use. A good maintenanceprogramis required to replace lamps as they burn out to preventover-voltage of remaining lamps.Optional Accessories (Sold Separately):KLV-PC1 - Photocell, Direct mount to enclosure knockout in right-handside of transformer enclosure.KLV-PC2 - Photocell, Remote mount with 10' cord for installation in any K" NPT cover plate (by others).KLV-TC24 - Plug-in Time Clock, Plugs into receptacle provided in transformer enclosure.Click here to view Options and Accessories application guidelines.
More Information... |
|
 |
KLV620 - Kim Lighting 600W Above Grade Transformer With 2 Circuit
Kim Lighting
KLV620 - Kim Lighting 600W Above Grade Transformer With 2 CircuitAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: 600w Above Grade Transformer With 2 Circuit ()Family: 12 Volt AccessoriesProduct Details:Enclosure: Formed 16 ga. stainless steel enclosure with integral hinge. Cover is secured with two stainless steel screws. A through hole is provided in the bottom edge for a padlock (by others). 1/2" knockouts on each side of the enclosure are provided for hardwiring or accessory photocell mounting.Transformer: Core and coil type fully epoxy encapsulated. Output is multi-tap 12V / 13V / 14V / 15V. The 200 and 300-watt units have single circuit output, the 600-watt unit has two circuits for output. Variable taps provide flexibility in system design with the 12 volt tap for fixtures near the transformer location and higher voltages for more remote fixtures.Terminal Block: 80-amp euro-style terminal block.Circuit Breaker: 25 amp magnetic circuit breaker (1) per circuit.Cord: Six foot, heavy duty outdoor power cord is provided and installed.Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.120V Input#18-2 SJTW cordNOTE: Output wattage is not to exceed 25 amps on each circuit. Weather conditions must be considered when determining load on transformers, hot weather areas should reduce the output wattage to prevent heat build-up on circuit breakers. The voltage at each fixture must not exceed 12 volt. Load and distance must be considered when determining which voltage tap to use. A good maintenanceprogramis required to replace lamps as they burn out to preventover-voltage of remaining lamps.Optional Accessories (Sold Separately):KLV-PC1 - Photocell, Direct mount to enclosure knockout in right-handside of transformer enclosure.KLV-PC2 - Photocell, Remote mount with 10' cord for installation in any K" NPT cover plate (by others).KLV-TC24 - Plug-in Time Clock, Plugs into receptacle provided in transformer enclosure.Click here to view Options and Accessories application guidelines.
More Information... |
|
 |
KLV625 - Kim Lighting 900W Above Grade Transformer With 3 Circuit
Kim Lighting
KLV625 - Kim Lighting 900W Above Grade Transformer With 3 CircuitAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: 900w Above Grade Transformer With 3 Circuit ()Family: 12 Volt AccessoriesProduct Details:Enclosure: Formed 16 ga. stainless steel enclosure with integral hinge. Cover is secured with two stainless steel screws. A through hole is provided in the bottom edge for a padlock (by others). 1/2" knockouts on each side of the enclosure are provided for hardwiring or accessory photocell mounting.Transformer: Core and coil type fully epoxy encapsulated. Output is multi-tap 12V / 13V / 14V / 15V. The 200 and 300-watt units have single circuit output, the 600-watt unit has two circuits for output. Variable taps provide flexibility in system design with the 12 volt tap for fixtures near the transformer location and higher voltages for more remote fixtures.Terminal Block: 80-amp euro-style terminal block.Circuit Breaker: 25 amp magnetic circuit breaker (1) per circuit.Cord: Six foot, heavy duty outdoor power cord is provided and installed.Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.120V Input#12-3 SJTW cordNOTE: Output wattage is not to exceed 25 amps on each circuit. Weather conditions must be considered when determining load on transformers, hot weather areas should reduce the output wattage to prevent heat build-up on circuit breakers. The voltage at each fixture must not exceed 12 volt. Load and distance must be considered when determining which voltage tap to use. A good maintenanceprogramis required to replace lamps as they burn out to preventover-voltage of remaining lamps.Optional Accessories (Sold Separately):KLV-PC1 - Photocell, Direct mount to enclosure knockout in right-handside of transformer enclosure.KLV-PC2 - Photocell, Remote mount with 10' cord for installation in any K" NPT cover plate (by others).KLV-TC24 - Plug-in Time Clock, Plugs into receptacle provided in transformer enclosure.Click here to view Options and Accessories application guidelines.
More Information... |
|
 |
KLV710 - Kim Lighting Scarab Accent Light
Kim Lighting
KLV710 - Kim Lighting Scarab Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: ScarabFamily: 12 Volt LuminairesLamping: MR16 Bipin HalogenWattage: 20W - 50WProduct Details:Housing: Die-cast aluminum body and socket enclosure.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens Frame: Integral die-cast aluminum lens ring and glare shield.Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.Gasketing: Silicone gaskets used throughout.Socket: G4 to GY6.35 socket for bipin lamp.Wiring: 6' No. 18-2 12 Volt cable with spade connectors for low voltage cable system connection.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Trim Ring, Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.Note: Remote transformer required.Optional Accessories (Sold Separately):EP17 - PowerPost MountKLV400 - Spear MountKLV405 - Surface Mount KLV415 - Extension ModuleColored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)Adjustable Glare Shield - Finish to match fixture ( Replaces standard lens ring/hood on fixture.)Click here to view Options and Accessories application guidelines.
More Information... |
|
 |
LA6AM - Kim Lighting Amber Lens
Kim Lighting
LA6AM - Kim Lighting Amber LensAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Lens ()Finish: Amber LensSeries: LensProduct Details:Molded colored glass lens, replaces standard clear glass lens in fixture. ColourAmberWarms color to yellow/orange.For EL220Replaces standard clear lens.
More Information... |
|
 |
LA6GR - Kim Lighting Green Lens
Kim Lighting
LA6GR - Kim Lighting Green LensAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Lens ()Finish: Green LensSeries: LensProduct Details:Molded colored glass lens, replaces standard clear glass lens in fixture. ColourGreenDeep green color accent.For EL220Replaces standard clear lens.
More Information... |
|
 |
LA6RD - Kim Lighting Red Lens
Kim Lighting
LA6RD - Kim Lighting Red LensAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Lens ()Finish: Red LensSeries: LensProduct Details:Molded colored glass lens, replaces standard clear glass lens in fixture. ColourRedDeep red color accent.For EL220Replaces standard clear lens.
More Information... |
|
 |
LA6RT - Kim Lighting Rose Lens
Kim Lighting
LA6RT - Kim Lighting Rose LensAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Lens ()Finish: Rose LensSeries: LensProduct Details:Molded colored glass lens, replaces standard clear glass lens in fixture. ColourRoseWarms color.For EL220Replaces standard clear lens.
More Information... |
|
| |
| |
| |
|
